Filter
Top Products
Basic Operations
Basic Operations
13
Use these buttons for additional operations
Tips
• Adjusting the volume or
the audio emphasis (see
page 31) will not affect
the recording level.
• If the AM program
makes a whistling
sound after you’ve
pressed r in step 3,
move the AM loop
aerial connected to the
player as far away as
possible.
• To erase a recording,
proceed as follows:
1 Disconnect the
microphone if
connected to the MIX
MIC jack.
2 Turn on the power.
3 Press FUNCTION on
the remote until
“TAPE” appears in
the display.
4 Press r .
To Press
stop recording p6
pause recording P
Press the button again to
resume recording.
turn on/off the player POWER
p6
P
POWER
3 Press r to start recording. (( is
depressed automatically and play
starts.)