Filter
Top Products
19-GB
3
Record an MD.
1 While the recorder is stopped, press
MENU.
Menu items appear in the display.
2 Press . or > repeatedly until
“SYNC-R” flashes in the display, and
then press ENTER.
3 Press . or > repeatedly until
“ON” flashes in the display, and then
press ENTER.
4 Press N while pressing REC.
The recorder pauses and stands by for
recording.
5 Play the source you want to record.
The recorder starts recording
automatically when it receives the
playing sound.
To stop recording, press x.
After you press x to stop, the recorder will automatically turn off in about 10 seconds (when using the
dry battery) or about 3 minutes (when using the AC power adaptor).
To cancel synchro-recording
Press . or > repeatedly until “OFF” flashes in the display in step 3, and then press ENTER.
Note
If you record on a previously recorded disc, the recorder is factory set to overwrite the
entire contents of the disc. If you want the recording to start after the existing contents,
do the procedure “Recording without overwriting existing material” (page 31) before
doing step 3, (“Record an MD.”, page 19).
REC
Control key
(x/
N/./
>)
X
MENU/ENTER
END
SEARCH
To Press
Record from the end of the
current contents
1)
If “R-Posi” (the record-starting position setting) is set to
“FrHere”, press END SEARCH, and then press N
while pressing REC.
1)
If “R-Posi” is set to “Fr End”, press N while pressing
REC.
Record over partway through
the previous recording
1)
N, ., or > to find the start point of recording and
press x to stop. Then press N while pressing REC.
Pause X
2)
.
Press X again to resume recording.
Remove the MD x, and open the lid.
3)
(The lid does not open while
“Edit” is flashing in the display.)