Filter
Top Products
31
4 Press . or > repeatedly to
select the desired recording mode,
and then press ENTER.
5 Press and slide REC.
6 Play the source you want to record.
To stop recording
Press x.
The recorder keeps the setting of the
recording mode when you record the next
time.
z
Audio components that support the LP2 stereo
or LP4 stereo modes are indicated by the
or logo marks.
Notes
• It is recommended that you use the AC power
adaptor for long recordings.
• When you record in LP4 mode, momentary
noise may be produced on very rare occasions
with certain sound sources. This is because of
the special digital audio compression
technology that enables a recording time 4
times longer than normal. If noise is produced,
it is recommended that you record in normal
stereo or LP2 mode to obtain better sound
quality.
Recording from TV or
radio (Analog
Recording)
This section explains how to record from
an analog equipment such as a cassette
recorder, radio, or TV.
1 Make connections.
Use the appropriate connecting cord
depending on the source equipment.
For details, see “Optional
accessories” (page 77).
When
connecting the cable, make sure to
insert the connectors firmly.
2 Press and slide REC.
The recording starts.
3 Play the source you want to record.
Recording
mode
1)
1)
For better sound quality, record in normal
stereo (
stereo) or LP2 stereo mode.
Display
window
on the
recorder
Recording
time
3)
3)
When using an 80-minute recordable MD
SP stereo SP Approx. 80
min.
LP2 stereo LP2 Approx. 160
min.
LP4 stereo LP4 Approx. 320
min.
Monaural
2)
2)
If you record a stereo source in monaural, the
sounds from left and right will be mixed.
MONO Approx. 160
min.
TV, Cassette
recorder, etc.
R (red)
L
(white)
Line cable
RK-G129,
RK-G136, etc.
to LINE IN
(OPTICAL)
to LINE OUT jacks, etc.
REC