Filter
Top Products
79
PROTECTED • You tried to record or edit on a MD with the tab in the record-
protect position.
, Slide the tab back (page 68).
Push STOP • You tried to open the lid while the recorder was storing disc
information.
, Open the lid only after pressing x and “TOC Edit” has
disappeared from the display.
READ ERR • The recorder cannot read the disc information correctly.
, Reinsert the disc.
REC ERR • Recording was not correctly done.
, Place the recorder at a place with no vibrations and record
again.
• The disc is soiled with an oil film or finger prints, is scratched, or
is not a standard disc.
, Try recording again with another disc.
Rehearsal • You tried to operate a button and or a lever (other than the control)
on the remote control while the recorder is performing rehearsal
play during a track division operation.
SEL Group • You selected “ : Name”, “ : Move”, or “ : Erase” while
the recorder is stopped or playing a track which is not belongs to a
group.
, Select a track within a group you want to edit, and then do the
editing operation again.
SEL Track • You selected “ : Name”, “ : Move”, or “ : Erase” after
playback has already finished or after END SEARCH was pressed,
and the recorder has stopped.
, Do the editing operation again after selecting the desired track
first.
SLOW CHG • You tried to charge at a place where the temperature is too low.
, Charge the battery at a temperature of +5°C (+41°F) to +40°C
(+104°F).
TEMP OVER • Heat has built up in the recorder.
, Let the recorder cool down.
TOC Edit • The MD player is recording information (track start and end
position) from the memory to the disk.
, Wait until this process is completed. Do not expose the player
to physical shock, nor disrupt power supply.
TOC ERR • The recorder cannot read the disc information correctly.
, Insert another disc.
, If it is no problem to erase the entire disc, do so (page 43).
TR FULL • Track number 254 has been reached.
, Erase unnecessary tracks (page 43).
Error message Meaning/Remedy