Filter
Top Products
54
Turning off the beep sound
You can turn on/off the beep sound on the
recorder and the remote control.
1 Enter the menu and select “OPTION”
- “BEEP”.
2 Select “OFF”.
To turn on the beep sound
Select “ON”.
Recording without
overwriting existing material
If you wish to avoid recording over the
current contents of an MD, do the
following procedure. All new material
will then be recorded from the end of the
current contents. The recorder is factory
set to record over existing material.
1 Enter the menu and select “OPTION”
- “R-Posi”.
2 Select “Fr End”.
To start recording over the
current contents
Select “FrHere”.
z
• To temporarily record without recording over
the current contents, press END SEARCH
before the start of recording. The recording
will begin after the last track, even if “R-Posi”
is set to “FrHere” (factory setting). The
remaining recordable time on the disc will
appear in the display when you press END
SEARCH.
• If the group recording setting (“G-REC”) is
set to “G-ON”, the recorder will always set to
“Fr End”.
Creating a new group when
recording
By pressing N while pressing REC •
T MARK, you can set the recorder to
create a new group automatically each
time you record. This is convenient when
recording several CDs in succession.
1 While the recorder is stopped, enter
the menu and select “R-SET” -
“G-REC”.
2 Select “G-ON”.
To turn the setting to normal
Select “G-OFF”.
Selecting the play mode
For details and remote control operation,
see page 34.
1 While the recorder is playing, enter
the menu and select “P-MODE”.
2 Select the desired play mode.
Indication A/
B
1)
Play mode
Normal/— All the tracks are
played once.
1 Trk/1 A single track is
played once.
Shuff
A
B
When you press >, B changes.
When you press ENTER, A appears.