Filter
Top Products
41
Others
e flashes in the
display on the
remote control and
the radio does not
operate.
• The alkaline dry battery is used up.
— Replace the battery with new LR6 (size AA) alkaline dry
battery (page 16).
Symptom Cause/Remedy
The player does not
work or works
poorly.
• The volume is low.
, Turn up the volume.
• No disc is inserted (“NoDISC” appears in the display).
, Insert a recorded disc.
• The HOLD function is turned on (“HOLD” appears in the display
when you press an operation button on the player).
, Disable HOLD by sliding the HOLD switch to the opposite
direction of the arrow.
• The lid is not firmly closed.
, Close the lid until it clicks.
• Moisture has condensed inside the player.
, Take the MD out and leave the player in a warm place for
several hours until the moisture evaporates.
• The dry battery is weak (“LoBATT” flashes or nothing appears).
, Replace the dry battery with a new one.
• The dry battery have been inserted incorrectly.
, Insert the battery correctly.
• An MD with nothing recorded on is inserted (“BLANK” appears
in the display).
, Insert a recorded MD.
• The disc is damaged or does not contain proper recording (“Rd
ERR” appears in the display).
, Reinsert the disc. If the error message still appears, replace it
with another disc.
, While operating, the player received a mechanical shock, too
much static, abnormal power voltage caused by lightning, etc.
, Restart the operation as follows.
1 Remove the dry battery from the player.
2 Leave the player for about 30 seconds.
3 Insert the dry battery.
The player will not
play.
• A Hi-MD disc or a standard disc in Hi-MD mode is inserted.
, Hi-MD discs or standard discs in Hi-MD mode cannot be
played on this player.
Symptom Cause/Remedy