Filter
Top Products
Recording from
externally connected
component
You can make digital recordings using an
optical cable connected to a CD player, digital
TV, or other digital equipment. Make sure to
use an optical cable for this procedure.
1
Connect the AC power cord and the
USB cable to the AC power adaptor.
AC power adaptor
USB cable
AC power cord
2
Connect the other end of the USB
cable to the recorder and the AC
power cord to a wall outlet.
To the USB cable
connecting jack
Recorder
To a wall
outlet
3
Connect the optical cable to
the recorder and an external
component.
For details on the optional optical cable,
see “Optional accessories” (
page 11).
CD player, MD player,
DVD Video player, etc.
To a digital
(optical) out jack
Optical
mini-plug
Optical
plug
Optical cable
To LINE IN (OPT)
4
Press OPEN to open the lid and
insert a disc in the recorder.
5
Confirm the settings of the
operation mode and the recording
level.
Refer to steps 3 and 4 of “Recording on a
disc” (
page 32).
6
Pause the sound source to be
recorded and confirm on the
recorder that the operation lamp is
off.
Continued
37
MZ-RH1/MZ-M200.GB.2-669-084-11(1)
Recording on a disc