Filter
Top Products
5
Confirm that the operation lamp is off (), and then press and slide REC on the
recorder ().
The operation lamp lights up in red and recording starts.
If you insert a previously recorded disc, the recording starts after the existing contents.
REC
The operation lamp
Basic recording operations
To Press
Stop
Press · CANCEL. (The operation lamp disappears.)
Pause
Press *. (The operation lamp flashes in red.) Press again to resume
recording.
Remove the disc
Press · CANCEL and open the lid. (The lid does not open until
“SystemFILE WRITING” disappears from the display and the operation
lamp stops flashing.)
Adding track marks
Press T MARK. (The operation lamp disappears for a moment.)
* A track mark is added at the point where you press again to resume recording while pausing; thus the
remainder of the track will be counted as a new track.
33
MZ-RH1/MZ-M200.GB.2-669-084-11(1)
Recording on a disc