Filter
Top Products
Editing recorded tracks on the MD
44
GB
Dividing recorded
tracks
(Divide Function)
When recording from the radio, etc.,
track marks may not be added correctly.
A number of tracks may be included in a
single track. You can divide these tracks
into separate tracks, and add a new
track mark to each track. All tracks
following the divided tracks are
renumbered.
EDIT MD ^
Example: Dividing track 1 into three tracks
1 While playing the MD, press MD ^ at the point
where you want to create a new track.
The player pauses.
2 Press EDIT repeatedly until “Divide” appears in
the display.
3 Press YES•ENTER.
“Divide OK?” appears in the display.
If you want to cancel the divide function at this
point:
Press NO•CANCEL or MD p.
Tips
• To put the divided
tracks together, see
“Combining recorded
tracks” on page 46.
• To divide a track
during recording, press
REC at the point where
you want to add the
track mark.
Note
If “Sorry” appears in
the display, you cannot
divide the track.
If you repeat editing on
the MD, you may not
be able to divide a
track. This is due to the
system limitations of
the MD (page 72), but
not caused by mal-
function.
Track
number
1
2
12
3
4
ABC D
A
B
C
D
Dividing
Track 1 is divided, and the track marks 2 and
3 are added.
YES
ENTER