Filter
Top Products
Getting Started
7
GB
3 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
Note
Keep the antennas away from the speaker cords.
4 For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
5 Connect the power cord to a wall
outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
Inserting two size AA (R6)
batteries into the remote
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
Tip
With normal use, the batteries should last for about six
months. When the remote no longer operates the
system, replace both batteries with new ones.
Attaching the speaker pads
Attach the supplied front speaker pads to the
bottom of the speakers to stabilize the speakers
and prevent them from slipping.
Extend the FM lead antenna horizontally
AM loop antenna
When carrying this system
Perform the following procedure to protect
the CD mechanism.
Use buttons on the CD player for the
operation.
1 Make sure that the disc removed from the
system.
2 Press CD.
3 While holding down x, move control
lever to M until “LOCK” appears.
4 Release M first, then release x.
5 Unplug the power cord.
E
e
e
E