Filter
Top Products
11
VOLUME
ALL DISCS
ß
Preset number
2 Press and hold + or – until the
frequency indication starts to
change, then release.
Scanning stops when the system tunes in
a station. “TUNED” and “STEREO” (for
a stereo program) appear.
3 Press TUNER MEMORY.
A preset number flashes in the display.
4 Press ENTER/NEXT.
The station is stored.
5 Repeat steps 1 to 4 to store other
stations.
To tune in a station with a weak
signal
Press + or – repeatedly in step 2 to tune in the
station manually.
To set another station to the exist
preset number
Start over from step 1. After step 3, press + or
– repeatedly to select the preset number you
want to store the station.
To erase a preset number
1 Press and hold TUNER MEMORY until the
preset number flashes in the display.
2 Press + or – repeatedly to select the preset
number you want to erase.
If you want to erase all preset numbers,
select “ALL ERASE”.
3 Press ENTER/NEXT.
When you erase a preset number, the total
number of preset stations decreases by one.
You can add a new preset number after the
last preset number.
Tip
The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
MONO
TUNED
STEREO
MHz
kHz
VOLUME
ALL DISCS
ß