Filter
Top Products
Basic Operations
17
1 Press TAPE EJECT Z and insert a
recorded tape into the cassette holder.
With the side you want to play
facing towards you
Z
bB x
mM
Xz
2 Press TAPE.
“TAPE” appears.
3 Press DIR MODE on the remote
repeatedly to select “
” to play one
side of the tape, “
”to play both
sides, or “
”* to play both sides
repeatedly.
* The tape automatically stops after playing
back five times.
4 Press TAPE nN.
The tape starts playing.
To change the playback direction, press
TAPE nN again. The reverse side will
begin playing.
To Do this
Stop playback Press TAPE x.
Pause Press TAPE X. Press again to
resume playback.
Fast-forward or
rewind
With the tape stopped‚ press
TAPE M or TAPE m.
Remove or replace
the tape
Press TAPE EJECT Z.
Adjust the volume Turn VOLUME.
Tips
• If you press TAPE nN when the power is off,
the system automatically turns on and starts playing
the tape if there is a tape in the holder (One Touch
Play).
• To switch to the tape while listening to another
source, press TAPE nN while the tape is
stopped. The tape will automatically start playing
(Automatic Source Selection).
• To play a tape recorded with the Dolby NR system,
press DOLBY NR on the remote before step 4.
“;” appears.