Filter
Top Products
38
GB
1 Place a CD and insert a recordable
tape into deck B.
2 Press FUNCTION repeatedly until
“CD” appears in the display.
3 Press PLAY MODE repeatedly until
“PROGRAM” appears in the
display.
4 Press one of the DISC 1~3 buttons to
select a CD.
5 Turn the jog dial until the desired
track appears in the display.
6 Press ENTER/NEXT.
The track is programmed. The program
step number appears, followed by the
total playing time.
7 To program additional tracks to be
recorded on side A, repeat steps 4 to
6.
Skip step 4 to select tracks from the same
disc.
8 Press P on the remote to insert a
pause at the end of side A.
“P” appears in the display and the total
playing time resets to “0.00” in the
display.
Recording a CD by
specifying track order
— Program Edit
11, EDIT
1
2
4
6
8
10
You can record tracks from all the CDs in the order
you want. When programming, make sure the
playing times for each side do not exceed the length
of one side of the tape. PBC function is cancelled
when VIDEO CDs (Ver. 2.0) are programmed.
12
Disc number
Track number
Total playing time
(including selected track)
(Power)
1
5
3,
DOLBY NR
p
CHECK
EDIT