Filter
Top Products
56
MHC-S90D 4-235-983-13(2) GB
Waking up to music
— Daily Timer
You can wake up to music at a preset time
every day. Make sure you have set the clock
(see “Setting the time” on page 17).
1 Prepare the music source you want to
play.
• DVD/VIDEO CD/CD: Load a DVD/
VIDEO CD/CD.
• Tape: Load a tape with the side you
want to play facing forward.
• Radio: Tune in the preset station you
want (see “Listening to the radio” on
page 42).
2 Adjust the volume.
3 Press CLOCK/TIMER (or CLOCK/TIMER
SET on the remote).
“DAILY1 SET” appears.
4 Press O or o repeatedly to select
“DAILY 1 (or 2)”, then press ENTER
(A/V amplifier or remote).
“ON” appears and the hour indication
flashes.
5 Set the time to start playback.
Press O or o repeatedly to set the hour, then
press ENTER (A/V amplifier or remote).
The minute indication flashes.
Press O or o repeatedly to set the minutes,
then press ENTER (A/V amplifier or
remote).
The hour indication flashes again.
6 Set the time to stop playback following
step 5.
7 Press O or o repeatedly until the music
source you want appears.
The indications change as follows:
t TUNER y DVD PLAY T
t TAPE PLAY T
8 Press ENTER (A/V amplifier or remote).
The type of timer (“DAILY 1” or “DAILY
2”), followed by the start time, stop time
and the music source, appears, then the
original display appears.
9 Turn off the power.
To
Check the setting
Change the setting
Cancel the Daily
Timer
Notes
• If the power is on at the preset time, the Daily
Timer does not work.
• When you use the Sleep Timer, the Daily Timer
will not turn on the system until the Sleep Timer
turns it off.
• The power turns on 15 seconds before the preset
time.
Do this
Press TIMER SELECT (or
CLOCK/TIMER SELECT on
the remote) and press O or o
repeatedly to select the
respective mode (“DAILY 1”
or “DAILY 2”), then press
ENTER (A/V amplifier or
remote).
Start over from step 1.
Press TIMER SELECT (or
CLOCK/TIMER SELECT on
the remote) and press O or o
repeatedly to select “TIMER
OFF”, then press ENTER (A/V
amplifier or remote).