Filter
Top Products
45
MHC-S90D 4-235-983-13(2) GB
Tape
Turn FUNCTION to
select the recording
source.
Recording from a tape
(High-Speed Dubbing)
Recording from a VIDEO CD/CD
(CD Synchro Recording)
Recording manually
Insert a recordable tape into deck B.
Turn FUNCTION to select
“TAPE A”.
Turn FUNCTION to select
“DVD”.
Insert the tape you want to
record into deck A.
Insert the VIDEO CD/CD
you want to record.
Prepare the recording
source.
Press CD SYNC.
Press REC PAUSE/
START.
Deck B stands by for recording.
“REC” indicator in the display flashes.
To reduce the hiss noise in low-level high-frequency signals, press DOLBY NR so that
“DOLBY NR” appears in the display (except when recording from a tape).
Press DIRECTION repeatedly to select g to record on one side.
Select j (or RELAY) to record on both sides.
Press REC PAUSE/START.
Recording starts.
Steps
1
2
3
4
5
6
Recording to a tape
— CD Synchro Recording/High-Speed Dubbing/Recording Manually/Program
Edit
You can record from a DVD, VIDEO CD, CD, tape, radio or other connected component. You can
use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is adjusted automatically.
To Press
Stop recording x (DVD/VIDEO CD/CD or
Deck B).
Pause recording* REC PAUSE/START.
* Only when recording manually.
Tips
• If you want to record from the reverse side, press
n or N (Deck B) (or TAPE B nN on the
remote) which does not light up after step 4 (when
the deck B is in recording pause).
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• (High-Speed Dubbing only)
If you set direction to j when the tapes have
different lengths, the tapes in each deck reverses
independently. If you select RELAY, the tapes in
both decks reverse together.
• CD synchro recording is not available with DVDs.
Note
The sound field automatically switches to 2CH
STEREO when you start recording.
Press HI-DUB.
Start playing the
recording source.
7
continued