Sony MHC-RV20 Stereo System User Manual


 
Tape – Play
19
GB
1 Press TAPE A/B repeatedly to select
deck A or B.
2 Press Z PUSH or PUSH Z on the unit.
3 Load a recorded/recordable tape in
deck A or B with the side you want to
play/record facing forward.
You can use TYPE I (normal) tape.
1 Load a tape.
2 Press TAPE A/B.
3 Press PLAY MODE repeatedly to select
“RELAY OFF” to play one side. Select
“RELAY ON” (Relay Play)* to play both
decks in succession.
4 Press N.
The tape starts playing.
* Relay play follow this cyclic sequence:
the front side of deck A t the front side
of deck B t stop automatically.
Other operations
Searching for the beginning of
the current or the next track
(AMS)*
To go forward
Press > during playback.
“TAPE A (or TAPE B) >>> +1” appears.
To go back
Press . during playback.
“TAPE A (or TAPE B) <<< –1” appears.
* AMS (Automatic Music Sensor)
Note
The AMS function may not operate correctly under the
following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– When the system is placed near a television.
Tape – Play
Loading a tape
With the side
you want to
play/record
facing
forward.
Playing a tape
To Do this
Stop play Press x.
Pause Press X. Press again to resume
play.
Fast-forward or
rewind
Press m or M.
Remove a tape Press
Z PUSH or PUSH Z on the
unit.