Filter
Top Products
12
GB
You can play all the tracks or a single track on a
disc.
Using the display window
Press REPEAT on the unit until “REP” or
“REP1” appears.
REP: For all the tracks on the disc, or all the
tracks in the album up to five times.
REP1: For a single track only.
To cancel Repeat Play
Press REPEAT on the unit repeatedly until both
“REP” and “REP1” disappear.
Notes
• You cannot select “REP” and “ALL DISCS SHUF”
at the same time.
• When you select “REP1”, that track is repeated
endlessly until “REP1” is canceled.
You can make a program of up to 25 steps from
all the discs in the order you want to play them.
You can synchro record the programmed tracks
onto a cassette tape (page 18).
Using the display window
1 Press CD.
2 Press PLAY MODE on the unit
repeatedly in stop mode until “PGM”
appears.
3 Press D.SKIP (or DISC 1 – 3 or DISC
SKIP/EX-CHANGE on the unit) to select
a disc.
To program all the tracks on a disc at once,
proceed to step 5 with “AL” displayed.
4 Press . or > repeatedly until the
desired track number appears.
When programming an MP3, press
ALBUM – or + to select album, then press
. or > repeatedly until the desired
track number appears.
5 Press ENTER.
The track is programmed.
The program step number appears,
followed by the total playing time.
Playing repeatedly
— Repeat Play
Creating your own
program
— Program Play
Selected track numberDisc tray number
Total playing time
(including selected track)