Sony MHC-F50 Stereo System User Manual


 
49
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range 87.5 – 108.0 MHz
Antenna terminals 75 ohm unbalanced
Intermediate frequency 10.7 MHz
AM tuner section
Tuning range
North American models: 530 – 1,710 kHz
(with the AM tuning
interval set at 10 kHz)
531 – 1,710 kHz
(with the AM tuning
interval set at 9 kHz)
Singaporian model: MW
531 – 1,602 kHz
(with the MW tuning
interval set at 9 kHz)
530 – 1,710 kHz
(with the MW tuning
interval set at 10 kHz)
SW
5.95 – 17.90 MHz
(with the SW tuning
interval set at 5 kHz)
Other models: 531 – 1,602 kHz
(with the AM tuning
interval set at 9 kHz)
530 – 1,710 kHz
(with the AM tuning
interval set at 10 kHz)
Intermediate frequency 450 kHz
Antenna AM loop antenna
External antenna terminal
Speaker
SS-F100 (for MHC-F100/MHC-FR1)
SS-F50 (for MHC-F50)
Speaker system 3-way, 3-unit,
bass-reflex type
Speaker units
Woofer: 17 cm, cone type
Tweeter: 5 cm, cone type
Super Tweeter: 2 cm, dome type
Nominal impedance 8 ohms (SS-F100)
6 ohms (SS-F50)
Dimensions (w/h/d) Approx. 215 x 375 x
285 mm
Mass Approx. 4.5 kg net per
speaker
General
Power requirements
North American models: 120 V AC, 60 Hz
Australian models: 220-240 V AC, 50/60 Hz
Other models: 110-120 V or 220-240 V
AC, 50/60 Hz Adjustable
with voltage selector
Power consumption
U.S. model: 195 watts (MHC-F100)
110 watts (MHC-F50)
Canadian model: 195 watts (MHC-F100)
120 watts (MHC-F50)
Other models: 210 watts
Dimensions (w/h/d) Approx. 280 x 375 x 450
mm
Mass Approx. 11.5 kg
(MHC-F100/MHC-FR1)
Approx. 10 kg
(MHC-F50)
Supplied accessories: AM loop antenna (1)
Remote (1)
RM-SF100 for
MHC-F100/MHC-FR1
RM-SF50 for MHC-F50
Sony SUM-3 (NS)
batteries (2)
FM lead antenna (1)
Speaker cords (2)
Optional accessory (for MHC-F100 Canadian Model
only): Surround speaker
SS-SR101
Speaker system 1-way, 1-unit, bass-reflex
type
Speaker units
Full range 8 cm, cone type
Nominal impedance 16 ohms
Dimensions (w/h/d) Approx. 205 x 95 x
240 mm
Mass Approx. 1.1 kg net per
speaker
Design and specifications are subject to change
without notice.