Filter
Top Products
46
Troubleshooting (continued)
There is severe hum or noise.
•A TV or VCR is placed too close to the
stereo system. Move the stereo system
away from the TV or VCR.
The sound from the connected source is
distorted.
•If “VIDEO” appears in the display when
you press FUNCTION, switch the display
to “MD” (see “Before connecting an MD
deck” on page 10).
The timer does not function.
•Set the clock correctly.
DAILY1, DAILY 2, and REC do not appear
when you press the TIMER SELECT button.
•Set the timer correctly.
•Set the clock.
The remote does not function.
•There is an obstacle between the remote
and the system.
•The remote is not pointing in the
direction of the system’s sensor.
•The batteries have run down. Replace the
batteries.
There is acoustic feedback.
•Decrease the volume level.
•Move the microphone away form the
speakers or change the direction of the
microphone.
The color irregularity on a TV screen
persists.
•Place the speakers farther away from the
TV set.
Speakers
Sound comes from one channel or
unbalanced left and right volume.
•Check the speaker connection and
speaker placement.
There is no sound from the surround
speakers (for MHC-F100/MHC-FR1 only).
•Connect the left and right surround
speakers correctly.
•Press SUR to turn on the surround effect.
CD Player
The CD will not play.
•Close the front cover.
•Check if the CD is correctly inserted in
the slot.
•The CD is dirty.
•The CD is inserted label side left.
•Moisture condensation has built up.
Leave the system turned on for about an
hour until the moisture evaporates.
Play does not start from the first track.
•The player is in program or shuffle mode.
Press CONTINUE.
“OVER” is displayed.
•You have reached the end of the CD.
Press = (or press and hold 0 on the
remote) to return.