Filter
Top Products
6
Step 1: Hooking up the main unit
(continued)
5 Set VOLTAGE SELECTOR to
position of your local power line
voltage (for models with a voltage
selector).
6 Connect the power cord to a wall
outlet.
Demo mode appears in the display.
7 Deactivate the demo mode by
pressing DISPLAY/DEMO when
the system power is turned off.
The demo mode is also deactivated
when you set the time.
Tip
You can reinforce the bass sound by connecting an
optional super woofer to the super woofer
connector.
VOLTAGE SELECTOR
110-120V 220-240V
To attach the speaker pads
Attach the supplied speaker pads to the
bottom of the speakers to stabilize the
speakers and prevent them from slipping.
Front speaker
Center surround speaker (MHC-F250AV
only)
Inserting two size AA (R6)
batteries into the remote
(for MHC-F250AV)
(for MHC-FR10 / F150)
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates
the system, replace both batteries with new ones.
}
}
]
]
]
}
]
}