Filter
Top Products
Basic Operations
23
To Do this
Stop play Press p.
Pause Press P PAUSE (P on the
remote). Press again to
resume play.
Fast-forward Press )/+ for the
front side or =/0 for
the reverse side () or
0 on the remote).
Rewind Press =/0 for the
front side or )/+ for
the reverse side (0 or
) on the remote).
Remove the cassette Press §.
Adjust the volume Turn VOLUME (or press
VOLUME (VOL) +/– on
the remote).
Searching for the beginning of a
track (AMS)
During playback, press the =/0 or )/
+ button pointing in the same direction as
the 9 or ( indicator to go forward. Press
the opposite direction to go back. (Or press
= or + on the remote.)
The search direction, + (forward) or – (back),
and number of songs being skipped (1~9)
appear in the display.
Example: searching forward 2 songs
* AMS (Automatic Music Sensor)
Notes
The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– If completely different information is recorded on
the left and right channels.
– When there are continuous sections of extremely
low level or low frequency sound (like those of a
baritone sax).
– When the unit is placed near a television. (In this
case, we recommend moving the unit farther away
from the television or turning off the television.)
Tips
•Pressing TAPE A (or TAPE B) ( or 9 when the
power is off automatically turns the power on and
starts tape playback if there is a tape in the deck
(One Touch Play).
•You can switch from another source to the tape
deck just by pressing TAPE A (or TAPE B) ( or
9 (Automatic Source Selection).
•When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY-NR so
that “DOLBY NR” appears.
•When dubbing tapes originally recorded with
Dolby NR, the dubbed tape is automatically
played with Dolby NR.