Filter
Top Products
22
8 Press ENTER.
The type of timer (DAILY 1 or DAILY 2),
followed by the start time, stop time, and
the music source, appear, then the original
display appears.
9 Press ?/1 to turn off the system.
To Do this
Waking up to music (continued)
Optional Components
Hooking up the optional
A/V components
You can connect your MD deck or VCR to this
system.
To the digital input jack of the MD deck
To the audio output of the MD deck or VCR
To Do this
Check the setting Press CLOCK/TIMER
SELECT on the remote and
press v or V repeatedly to
select the respective mode
(DAILY 1 or DAILY 2), then
press ENTER.
Change the setting
Start over from step 1.
Cancel the timer Press CLOCK/TIMER
SELECT on the remote and
press v or V repeatedly to
select “TIMER OFF”, then
press ENTER.
Tip
The system turns on 15 seconds before the preset
time.
Notes
• You cannot activate DAILY 1 and DAILY 2 Timer
at the same time.
• When you use the Sleep Timer, Daily Timer will
not turn on the system until the Sleep Timer turns it
off.
• You cannot activate Daily Timer and Timer-
recording at the same time.
Make a digital
recording from
CD to MD
Connect the optional optical cable.
Listen to the
connected
MD deck
Press MD (VIDEO).
Listen to the
connected VCR
Hold down MD (VIDEO) and
press ?/1. This switches the
“MD” function to “VIDEO”. Once
you enable the “VIDEO” function,
just press MD (VIDEO).