Filter
Top Products
14
Tape
Loading a tape
1 Press TAPE A/B repeatedly to select
deck A or B.
2 Press Z.
3 Insert a recorded tape in deck A or B
with the side you want to play/record
facing forward.
With the side
you want to
play/record
facing forward.
Playing a tape
You can use TYPE I (normal) tape.
1 Load a tape.
2 Press DIRECTION repeatedly to select
g to play one side. Select j* to
play both sides.
To play both decks in succession, select
RELAY (Relay Play)**.
3 Press nN.
Press nN again to play the reverse side*.
The tape starts playing.
Tape presence indicator
Reverse
indicator
Forward
indicator
* For MHC-DX20/RG30, deck A doesn’t play the
reverse side.
**Relay Play always follows this cyclic sequence up
to five times, then stops:
t Deck A (front side) t Deck A (reverse side)
t Deck B (front side) t Deck B (reverse side)
For MHC-DX20/RG30, after the playback of the
front side of deck A, deck B repeats the sequence
five times.
To Do this
Stop play Press x.
Pause Press X. Press again to
resume play.
Fast-forward
or rewind
Press m or M.
Remove
the cassette
Press Z.
Searching for the beginning of the
current or the next track (AMS)*
To go forward
Press > during playback when N lights.
“TAPE A (or TAPE B) >>> +1” appears.
Press . during playback when n lights.
“TAPE A** (or TAPE B) <<< +1” appears.
To go back
Press . during playback when N lights.
“TAPE A (or TAPE B) <<< –1” appears.
Press > during playback when n lights.
“TAPE A** (or TAPE B) >>> –1” appears.
* AMS (Automatic Music Sensor)
**For MHC-DX20/RG30, deck A doesn’t play the
reverse side.
Tip
When a tape is inserted, corresponding forward/
reverse indicators light.
Note
The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– When the system is placed near a television.