Filter
Top Products
30
EN
5 When you finish entering tracks, press
(4) (PLAY MODE) for two seconds.
6 Press (SHIFT).
Notes
•“**Wait**” appears in the display while the unit
is reading the data, or if a disc has not been put
into the unit.
•“*Mem Full*” appears in the display when you
try to enter more than 12 tracks into a
programme.
Playing the stored programme
Changing the disc order in the unit will not
affect programme memory play.
You can select:
•PGM 1 – to play Programme 1.
•PGM 2 – to play Programme 2.
•PGM 1+2 – to play Programmes 1 and 2.
1 Press (SHIFT).
2 Press (4) (PLAY MODE) repeatedly until
“PGM” appears.
3 Press (5) ( n) repeatedly until the
desired programme appears.
Programme 1 playback
µ
Programme 2 playback
µ
Programmes 1 and 2 playback
µ
Normal playback
Play starts in the selected programme play
mode.
Creating a programme
— Programme Memory (CD/MD unit with
programme memory function)
You can play tracks in any order you want by
creating and storing programmes in the unit’s
memory. You can make two programmes:
Programme 1 and Programme 2. You can
select up to 12 tracks for each programme. You
can store the programmes in memory.
1 Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
Programme edit mode
“P 1” indicates Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display “P 1” above.
To select Programme 2, press (5) (n)
repeatedly until “P 2” appears.
2 Select the track you want.
1 Press (SOURCE) repeatedly to select
CD or MD.
2 Press (MODE) repeatedly to select the
unit.
3 Press (SHIFT), then press the number
button to select the disc.
4 Press (SHIFT).
5 Push the SEEK/AMS control up or
down to select the track.
3 Press (6) (ENTER) momentarily.
4 To continue entering tracks, repeat steps
2 and 3.
PLAY
DISC TRACK
MODE ENTER
PGM
1
PLAYMODE
PGM
2
PLAYMODE
PGM
1+2
PLAYMODE
PLAYMODE
µ
PLAYMODE ENTER
PLAY
DISC TRACK
MODE ENTER