Filter
Top Products
22
EN
Playing the specific tracks only
You can select:
•Bank on to play the tracks with the “Play”
setting.
•Bank inv (Inverse) to play the tracks with the
“Skip” setting.
1 During playback, press (SHIFT), then
press (3) (PLAY MODE) repeatedly until
“Bank” appears.
2 Press (4) (n) to repeatedly until the
desired setting appears.
z Bank on z Bank inv z Bank off
Playback starts from the track following the
current one.
3 Press (SHIFT).
To go back to normal playing mode, select
“Bank off“ in step 2 above.
Selecting specific tracks
for playback
— Bank
(CD unit with the custom file function)
If you label the disc, you can set the unit to
skip tracks and play only the tracks you want.
1 Start playing the disc and press (SHIFT).
Then press (3) (PLAY MODE) for two
seconds.
Bank edit mode.
Note
If you have not labeled the disc, the bank edit
mode does not appear. To go back to normal
playback mode, press (SHIFT).
2 Push the (SEEK/AMS) control up or down
to select the track number you want to
skip and press (5) (ENTER).
The indication changes from “Play” to
“Skip.” If you want to return to “Play,"
press (5) (ENTER) again.
3 Repeat step 2 to set the “Play” or “Skip”
mode on all the tracks.
4 Press (3) (PLAY MODE) for two seconds.
The unit returns to normal CD playback
mode.
5 Press (SHIFT).
Notes
• You can set the “Play” and “Skip” mode on up
to 24 tracks.
• You cannot set the “Skip” mode on all the
tracks.
DISC
PLAY MODE ENTER
TRACK
DISC
PLAY MODE ENTER
TRACK
PLAY MODE
BANK