Filter
Top Products
10
EN
Other Functions
Using the rotary remote
The rotary remote works by pressing buttons
and/or rotating controls.
You can control the optional CD or MD
changer with the rotary remote.
By pressing the button (the
SOURCE and MODE buttons)
Every time you press (SOURCE), the
source changes as follows:
Tuner n CD n MD
Pressing (MODE) changes the operation
in the following ways:
• Tuner: FM1 n FM2 n AM
• CD changer: CD1 n CD2 n …
• MD changer: MD1 n MD2 n …
Tip
When the POWER SELECT switch is set to position B,
you can turn on this unit by pressing (SOURCE) on the
rotary remote.
By rotating the control (the SEEK/
AMS control)
(SOURCE)
(MODE)
By pressing in and roating the
control (the PRESET/DISC control)
Push in and rotate the control to:
•Receive the stations memorised on the
number buttons.
•Change the disc.
Other operations
Changing the operative direction
The operative direction of controls is factory-
set as in the illustration below.
Press (LIST) to display the
memorised names.
Press (SOUND) to adjust the
volume and sound menu.
Rotate the VOL control to
adjust the volume.
Press (MUTE) to
mute the sound.
Press (OFF) to turn
off the unit.
OFF
Rotate the control momentarily and
release it to:
•Locate a specific track on a disc. Rotate
and hold the control until you locate the
specific point in a track, then release it to
start playback.
•Tune in the stations automatically. Rotate
and hold the control to tune in the specific
station.
To increase
To decrease