Filter
Top Products
11
MD COVER ASS’Y
HEAT SINK
1 four screws
(B2 × 3)
3 MD cover ass’y
2 Pushing the Cassette Holder in the direction of arrow A with a
screwdriver, etc., disengage the Shaft (MD Cover Guide) from
the slot in the MD Cover Ass’y.
Note: Take care not to scratch the optiocal Pick-up when pushing
the Cassette Holder with a screwdriver. etc.
shaft (MD cover guide)
cassette holder
A
1 three screws
(PTT2.6 × 8)
2 two screws
(PTT2.6 × 12)
1 screw
(PTT2.6 × 8
)
1 two screws
(PTT2.6 × 8)
3 heat sink