Filter
Top Products
33
Editing Recorded MDs
Combining Tracks
This function allows you to combine any two
tracks into a single track. The two tracks need not
to be consecutive nor chronological. You can
combine several tracks into a single medley, or
several independently recorded portions into a
single track. When you combine two tracks, the
total number of tracks decreases by one and all
tracks following the combined track are
renumbered.
Example: Combining the second
track and the fourth track
AAA BBB
BBB
DDD
CCC
1 2 3
AAA BBB DDDCCC
1 2 43
-
If both of the combined tracks have a track name,
the name of the second track is erased.
1 While the deck is stopped, playing, or
paused, press MENU/NO.
“Edit Menu” appears in the display.
2 Press ./> repeatedly (or turn
./> on the deck) until “Combine
?” appears, then press YES (or ./
> on the deck).
3 Press ./> repeatedly (or turn
./> on the deck) until the
number of the first track of the two to
be combined appears, then press YES
(or ./> on the deck).
The display for selecting a second track
appears and the deck plays the portion where
joining will occur (the end of the first track
and the beginning of the track following it)
repeatedly.
4 Press ./> repeatedly (or turn
./> on the deck) until the
number of the second track of the two to
be combined appears, then press YES
(or ./> on the deck).
“Complete!!” appears for a few seconds and
the tracks are combined. The deck starts to
play the combined track.
To cancel the operation
Press MENU/NO or x (or x/Z on the deck).
z
You can undo the combination
For details, see “Undoing the Last Edit” on page 38.
Notes
• If “Impossible” appears in the display, the tracks
can’t be combined because repeated editing has
been done to the track(s). This is a technical
limitation of the MD system and is not a mechanical
error.
• You cannot combine tracks which were recorded in
different recording modes.