Sony LBT-XB3 Stereo System User Manual


 
7
nn
Step 3: Presetting
radio stations
4 Press TUNER MEMORY.
A preset number flashes in the display.
5 Press TUNING +/– to select the
preset number you want.
6 Press ENTER/NEXT.
The station is stored.
7 Repeat steps 1 through 6 to store
other stations.
To tune in a station with a weak
signal
Press TUNING MODE repeatedly until
“MANUAL” appears in step 2, then press
TUNING +/– to tune in the station.
Note
The preset stations are cancelled when you
disconnect the mains lead or a power failure occurs
for half a day.
3,5 1246
POWER
You can preset the following number of
stations:
3 band model: 20 for FM, 10 for MW, and
10 for LW
4 band model: 20 for FM, 10 for MW, 10
for LW, and 5 for UKV
1 Press TUNER/BAND repeatedly
until the band you want appears in
the display.
Each time you press this button, the
band changes as follows:
The bands you can select depend on the
kind of tuner built into your system.
Confirm the bands by pressing TUNER/
BAND repeatedly.
3 band model:
FM n MW n LW
4 band model:
FM n MW n LW n UKV*
* When you select this band, “STEREO PLUS”
appears in the display.
2 Press TUNING MODE repeatedly
until “AUTO” appears in the
display.
3 Press TUNING +/–.
The frequency indication changes and
scanning stops when the system tunes in
a station. “TUNED” and “STEREO” (for
a stereo programme) appear.
LBT-XB3
DOLBYNR
OFF
TUNED
STEREOAUTO
ALL DISC S
MHz
LBT-XB5/XB6
DISCALL
DOLBYNR
OFF
AUTO
TUNED
STEREO
MHz
S
LBT-XB5/XB6
LBT-XB3
DOLBYNR
OFF
TUNED
STEREOAUTO
ALL DISC S
DISCALL
DOLBYNR
OFF
AUTO
TUNED
STEREO
S
LBT-XB3
LBT-XB5/XB6
DOLBYNR
OFF
TUNED
STEREOAUTO
ALL DISC S
DISCALL
DOLBYNR
OFF
AUTO
TUNED
STEREO
S