Filter
Top Products
40
Specifications
CD player section
System Compact disc and digital
audio system
Laser Semiconductor laser
(λ = 780 nm)
Emission
duration: continuous
Laser output Max. 44.6
µ
F*
* This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
Wavelength 780 – 790 nm
Frequency response 2 Hz – 20 kHz (±0.5 dB)
Signal-to-noise ratio More than 90 dB
Dynamic range More than 90 dB
Tape player section
Recording system 4-track 2-channel stereo
Frequency response 60 – 13,000 Hz (±3 dB),
(DOLBY NR OFF) using a Sony TYPE I
cassette
60 – 14,000 Hz (±3 dB),
using a Sony TYPE II
cassette
Wow and flutter ±0.15% W. Peak (IEC)
0.1% W. RMS (NAB)
±0.2% W. Peak (DIN)
Amplifier section
DIN power output
(LBT-XB3) 55 + 55 watts
(6 ohms at 1 kHz, DIN)
(LBT-XB5) 100 + 100 watts
(6 ohms at 1 kHz, DIN)
(LBT-XB6) 100 + 100 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output
(LBT-XB3) 65 + 65 watts
(6 ohms at 1 kHz, 10%
THD)
(LBT-XB5) 120 + 120 watts
(6 ohms at 1 kHz, 10%
THD)
(LBT-XB6) 120 + 120 watts
(6 ohms at 1 kHz, 10%
THD)
Music power output:
(LBT-XB3) 100 + 100 watts
(LBT-XB5) 210 + 210 watts
(LBT-XB6) 210 + 210 watts
Inputs
PHONO IN (phono jacks):
sensitivity 3 mV,
impedance 47 kilohms
VIDEO (AUDIO) IN (phono jacks):
sensitivity 250 mV,
impedance 47 kilohms
MIX MIC (phone jack): sensitivity 1 mV,
impedance 10 kilohms
Outputs
PHONES (stereo phone jack):
accepts headphones of 8
ohms or more
SPEAKER:
(LBT-XB3) accepts impedance of 6 to
16 ohms
(LBT-XB5/XB6) accepts impedance of 8 to
16 ohms
SURROUND SPEAKER (LBT-XB5/XB6 only):
accepts impedance of 16
ohms