Filter
Top Products
model name [LBT-GPX77/GPX55/MHC-GPX88/GPX77/GPX55/GPX33]
[4-449-052-13(1)] GB
20
GB
filename[D:\MASNI JOB
FOLDER\SO130010\GB\4449052131\4449052131\06BAS.fm]
masterpage:Left
You can transfer sound from an analog
audio source (other than CD, USB or
Bluetooth function) to a USB device.
Use the buttons on the unit to perform this
operation.
1 Connect a transferable USB
device to the B port (page 19).
2 Press TUNER/BAND or AUDIO IN
repeatedly to select the source
you want to transfer.
3 Press REC TO USB B.
“PUSH ENTER” appears in the
display panel.
4 Press ENTER.
The transfer starts when “DON’T
REMOVE” appears in the display
panel.
5 Start playback the source.
To stop transferring
Press x.
To create a new MP3 file
Press REC TO USB B during Analog
Transfer.
“NEW TRACK” appears in the display
panel.
A new MP3 is also created automatically
after approximately 1 hour of transfer.
Notes
• When a new MP3 file is created, transfer is
disabled for the time being.
• If you press REC TO USB B again after a few
seconds, a new MP3 file can be created.
Use the buttons on the unit to perform this
operation.
1 Connect a USB device to the A
or B port.
2 Press USB/USB SELECT
repeatedly until “USB A” or
“USB B” lights up in the display
panel when playback is stopped.
3 Press ./> or +/–
repeatedly to select the audio
file or folder.
4 Press OPTIONS.
5 Press / to select “USB
ERASE”, then press ENTER.
“FOLDER ERASE” or “TRACK
ERASE” appears in the display panel.
6 Press ENTER.
“COMPLETE” appears in the display
panel.
When first transferring to a USB device, a
“MUSIC” folder is created directly below
the “ROOT” and a transfer mode-oriented
folder is created within the “MUSIC”
folder. Folders and files are generated
within any of the transfer mode-oriented
folders as follows.
Synchronized Transfer
Transferring analog audio
(Analog Transfer)
Erasing audio files or folders
from the USB device
Folder and file generation
rules
Source Folder name File name
Audio files Same as the source
AUDIO CD “CDDA0001”* “TRACK001”*