Filter
Top Products
22
Do this
Press TIMER SELECT and
then press v/V to select
“DAILY,” then press
ENTER/NEXT.
Start from step 1.
Press TIMER SELECT and
then v/V to select “OFF,”
then press ENTER/NEXT.
To
Check the setting
Change the setting
Cancel the timer
operation
Note
When you use the Sleep Timer, Daily Timer and
Timer recording will not turn on the system until the
Sleep Timer turns it off.
Tip
The power turns on 15 seconds before the preset time.
Waking up to music
— Daily Timer
You can wake up to music at a preset time
every day. Make sure you have set the clock
(see “Setting the time” on page 8).
1 Prepare the music source you want to
play.
• CD: Load a CD. To start from a specific
track, make a program (see “Programming
the CD tracks” on page 10).
• Tape: Load a tape with the side you want
to play facing forward.
• Radio: Tune in the preset station you
want (see “Presetting radio stations” on
page 12).
2 Adjust the volume.
3 Press c/CLOCK SET.
“SET” appears and “DAILY” flashes in the
display.
4 Press v/V repeatedly to select
“DAILY,” then press ENTER/NEXT.
“ON” appears and the hour digits flash in
the display.
5 Set the time to start playback.
Press v/V repeatedly to set the hour, then
press ENTER/NEXT.
The minute indication starts flashing.
Press v/V repeatedly to set the minute, then
press ENTER/NEXT.
The hour indication flashes again.
6 Set the time to stop playback following
the above procedure.
7 Press v/V repeatedly until the music
source you want appears.
The indication changes as follows:
t TUNER y CD PLAY T
t TAPE PLAY T
8 Press ENTER/NEXT.
The start time, stop time, and the music
source appear, then the original display
appears.
9 Turn off the power.