Filter
Top Products
16
Tips
•If you want to record on the reverse side, press ª
so the indicator on the ª button (for the reverse
side) lights up green after pressing r REC in step
5.
•When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
•To record non-preset stations, select “MANUAL”
in step 2, then press TUNING +/– to tune in the
desired station.
•When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR
before step 7 so “DOLBY NR B” appears in the
display.
•To record with surround effect, press
SURROUND so “SUR
” appears in the
display.
The equalizer settings will not be recorded.
•If noise is heard while recording from the radio,
move the appropriate antenna to reduce the noise.
Playing a tape
You can play any type of tape, TYPE I
(normal), TYPE II (CrO2) or TYPE IV (metal).
The deck automatically detects the tape type.
To select either deck A or B, press DECK A
( or DECK B ( on the remote.
112
33
pP
0/
)
p
p
0/)
P
DECK A (
DECK B (
VOLUME
VOLUME +/–
DOLBY NR
0/
)
Recording from the radio
(continued)
1/u
(Power)