Filter
Top Products
8
GB
About the indicators on the display
L
CR
SL SR
SW
D.RANGE
RDS
ST MONO
MEMORY
S
DIGITAL
DTS
HDMI
PL
OPT
COAX
21 3 4 5 6 7
8
9q;qaqsqdqf
SLEEP
LFE
Name Function
A LFE Lights up when the disc being
played back contains an LFE
(Low Frequency Effect) channel
and the LFE channel signal is
actually being reproduced.
B SLEEP Lights up when the sleep timer is
activated (page 62).
C Playback
channel
indicators
L
R
C
SL
SR
S
The letters (L, C, R, etc.) indicate
the channels being played back.
The boxes around the letters vary
to show how the receiver
downmixes the source sound.
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
D ;
DIGITAL Lights up when receiver is
decoding Dolby Digital signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that IN MODE is set to
“AUTO”.
E HDMI Lights up when a playback
component is connected to this
receiver using an HDMI jack
(page 20).
L
CR
SL SR
SW
F Preset
station
indicators
Lights up when using the receiver
to tune in radio stations you have
preset. For details on presetting
radio stations, see page 50.
G D.RANGE
Lights up when dynamic range
compression is activated (page
36).
H Tuner
indicators
Lights up when using the
receiver to tune in radio stations
(page 49), etc.
Note
“RDS” lights up for models of
area code CEL, CEK only.
I MEMORY Lights up when a memory
function, such as Preset Memory
(page 51), etc., is activated.
J COAX Lights up when DVD input is
selected and the source signal is
a digital signal being input
through the COAX IN jack.
K OPT Lights up when IN MODE is set
to “AUTO” and the source signal
is a digital signal being input
through the OPT IN jack.
L ;PL/
;PLII
“; PL” lights up when the
receiver applies Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
“; PLII” lights up when the
Pro Logic II Movie/Music
decoder is activated.
M DTS Lights up when the receiver is
decoding DTS signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that IN
MODE is set to “AUTO”.
N SW Lights up when the audio signal
is output from the
SUBWOOFER jack.
Name Function