Filter
Top Products
29
GB
Additional Information
The remote does not function.
• Point the remote at the remote sensor on the
receiver.
• Remove any obstacles in the path between the
remote and the receiver.
• Replace both batteries in the remote with new
ones, if they are weak.
• Make sure you select the correct function on the
remote.
• If the remote is set to operate the TV only, use
the remote to select a source or component other
than TV before operating the receiver or other
component.
Reference sections for clearing the
receiver’s memory
To clear See
All memorized settings page 13
Customized sound fields page 23
Specifications
Amplifier section
POWER OUTPUT
Rated Power Output at Stereo mode
(8 ohms 1 kHz, THD 0.3 %)
80 W + 80 W
Reference Power Output
(THD 0.3 %) Front
1)
: 80 W/ch
Center
1)
: 80 W
Surround
1)
: 80 W/ch
1) Depending on the sound field settings and the
source, there may be no sound output.
Frequency response
MICRO SP.: 150 Hz – 20 kHz
0/–3 dB
150 Hz (6 dB/oct)
Low cut Filter ON
NORMAL SP.: 20 Hz – 20 kHz
+/–0.5 dB
Inputs (Analog) Sensitivity: 250 mV
Impedance: 50 kilohms
S/N
2)
: 80 dB
(A, 20 kHz LPF,
250 mV
3)
)
2) INPUT SHORT.
3) Weighted network, input level.
Inputs (Digital)
DVD (Coaxial) Sensitivity: –
Impedance: 75 ohms
S/N: 96 dB
(A, 20 kHz LPF)
TV, AUX (Optical) Sensitivity: –
Impedance: –
S/N: 96 dB
(A, 20 kHz LPF)
Outputs
FRONT L/R, CENTER, SURROUND L/R,
SUB WOOFER Voltage: 2 V
Impedance: 1 kilohms
Video section
Inputs
S-video: Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
Outputs
S-video: Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
FM tuner section
Tuning range 87.5 – 108.0 MHz
Antenna terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
Sensitivity Mono: 18.3 dBf,
2.2 µV/75 ohms
Stereo: 38.3 dBf,
22.5 µV/75 ohms
Usable sensitivity 11.2 dBf, 1 µV/75 ohms
S/N Mono: 76 dB
Stereo: 70 dB
Harmonic distortion at 1 kHz
Mono: 0.3%
Stereo: 0.5%
Separation 45 dB at 1 kHz
Frequency response 30 Hz – 15 kHz
+0.5/–2 dB
Selectivity 60 dB at 400 kHz
continued