Filter
Top Products
21
GB
E:\SEM_Janet\Year2006\Revision_Data\Revision3_HT-
DDW880\J9060043_2662263321DDW880_GB\2662263321\GB03CON_HT-DDW880-CEL.fm
masterpage: Right
HT-DDW880
2-662-263-32 (2)
Getting Started
3b: Connecting the video components
This section describes how to hook up your
components to this receiver. Before you begin,
refer to “Component to be connected” below
for the pages which describe how to connect
each component.
After hooking up all your components,
proceed to “4: Connecting the antennas” (page
28).
Component to be connected
* Except for models of area code E51.
The image quality depends on the connecting
jack. Refer to the illustration that follows.
Select the connection according to the jacks on
your components.
* Except for models of area code E51.
Notes
• Connect image display components such as a TV
monitor or a projector to the MONITOR OUT jack
on the receiver.
• Turn on the receiver when the video and audio of a
playback component are being output to a TV
through the receiver. If the power supply of the
receiver is not on, neither video nor audio is
transmitted.
Reassigning video input signals
to another input
Component video input signals can be
reassigned to another input (page 61). You can
also reassign the HDMI* input to another
input (page 62).
* Except for models of area code E51.
How to hook up your
components
Component Page
TV monitor 22
DVD player/DVD recorder 23
Satellite tuner 26
With HDMI jack* 25
VCR 27
Camcorder, video game, etc. 27
Video input/output jack to be
connected
TV monitor, etc.
INPUT jack
Receiver
MONITOR OUT
jack
Receiver INPUT
jack
High quality image
COMPONENT
VIDEO
VIDEO
HDMI
*
COMPONENT
VIDEO VIDEO
HDMI
*
COMPONENT
VIDEO VIDEO
HDMI
*
COMPONENT
VIDEO
VIDEO
HDMI
*
V
ideo component
OUTPUT jack
GB01COV_HT-DDW880-CEL.book Page 21 Wednesday, January 18, 2006 9:10 AM