33
US
D:\CANNES\SONY_HA\JOB 2007\IM\HT-7100DH\US_HT-7100DH_data\US03CON_HT-7100DH-
U.fm
masterpage: Right
HT-7100DH
3-093-550-11 (1)
Getting Started
8: Adjusting the speaker
levels and balance
(TEST TONE)
You can adjust the speaker levels and balance
while listening to the test tone from your
listening position.
Tip
The receiver employs a test tone with a frequency
centered at 800 Hz.
1 Press RECEIVER.
The RECEIVER indicator lights up and
receiver operation is activated.
2 Press MENU.
“1-LEVEL” appears on the display.
3 Press or b to enter the
menu.
4 Press V/v repeatedly to select
“T. TONE”.
5 Press or b to enter the
parameter.
6 Press V/v repeatedly to select
“T. TONE Y”.
The test tone is output from each speaker
in sequence as follows:
Front left t Center t Front right t
Surround right t Surround left t
Sub woofer
7 Adjust the speaker levels and
balance using the LEVEL menu
so that the level of the test tone
sounds the same from each
speaker.
For details, see “Adjusting the level
(LEVEL menu)” (page 41).
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +/–. You can also
use MASTER VOLUME on the receiver.
• The adjusted value are shown on the display
during adjustment.
8 Repeat steps 1 to 6 to select
“T. TONE N”.
You can also press any input buttons.
The test tone turns off.
G
f
F
g
GUIDE
DISPLAY
MEMORY
-/--
>
10
m
M
.
>
AUX
DMPORT
RECEIVER
O
CLEAR
ENTER
0//10
8
7
4
1 2 3
6
9
5
SLEEP
CATEGORY
MODE
AUTO CAL
2CH
A.F.D. MOVIE MUSIC
MUTING
TV VOL
MASTER VOL
TV CH
PRESET
REPLAY
–
CATEGORY
+
ADVANCE
TUNING
+
TUNING
–
DISC SKIP
RETURN//
EXIT
MENU
OPTIONS
TOOLS
D.TUNING
2
MASTER
VOL +/–
3-6
1