Sony HBH-65 Headphones User Manual


 
This is the Internet version of the user's guide. © Print only for private use.
Headset overview 7
Pairing
To turn the headset on
Press and hold the call handling button until you
hear a short low tone followed by a short high tone.
The headset indicator light flashes green.
Note: The first time the headset is turned on, it might
automatically be ready for pairing.
To turn the headset off
Press and hold the call handling button until you
hear a short high tone followed by a short low tone.
The headset indicator light switches off.
Pairing the headset with a phone
You pair the headset with the phone by adding it to a
list of paired devices in the phone. The two devices
then recognize each other when they connect. Once
you have paired your headset with the phone, you do
not need to pair it again until you want to use it with
another device.
To pair the headset with a Sony Ericsson or
Ericsson phone
1. With the headset turned off, press and hold the call
handling button for up to 10 seconds until the
indicator light on the headset flashes green and red.
2. In the phone, scroll to Extras or Connect,
YES,
Bluetooth,
YES, Paired devices, YES, Add device, YES,
Phone initiates,
YES.
3. A list of device types that you can pair with your phone
appears. Scroll to Handsfree or Headset,
YES. Make
sure that the headset is within 1 m (3 ft) of the phone.
4. HBH-65 appears in the display. Press
YES.
Up to
1 m