Filter
Top Products
This is the Internet version of the user's guide. © Print only for private use.
Using the headset 11
Adjusting the volume
You can adjust the headset speaker volume during
a call, or the ring volume when you are not engaged
in a call.
To adjust the volume
• To increase the volume, press .
• To decrease the volume, press .
Note: The headset uses increasing volume. For safety
reasons, it starts with a low volume level before the
maximum set level is reached.
To turn off the microphone
• During a call, press and release both and
to turn off the microphone. A repeated beep is heard
while the microphone is turned off.
• Press and release both and again to
resume the conversation.
Transferring sound from phone to headset
If you make a call using your phone, you can transfer
the sound to the headset if the headset is on, paired
with the phone, and within range.
To transfer the sound to the headset
• During a call, press the call handling button to transfer
the sound to the headset. The headset beeps until the
sound has been transferred.
If the headset is turned on after a call has been
initiated, you can transfer the sound to the headset by
pressing the call handling button.
Note: To transfer the sound from the headset to
the phone, refer to the phone’s user documentation.
Lost connection to headset
If the connection to the headset is lost during an
ongoing call, press the
YES key on the phone to transfer
the call to the phone, otherwise the call is disconnected
after 30 seconds.