Filter
Top Products
25
Hookups
• ON (only if the amplifier (receiver) has
a DTS decoder) (page 65)
15Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, set “MPEG” to
“MPEG” (page 65).
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 20 to
22 ( through ). Each of these is the
default setting and does not need to be
adjusted when you first connect the player.
Refer to page 60 for using the Setup Display.
Audio Connection (pages 19 to 22)
• No additional settings are needed.
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 64)
• If the sound distorts even when the volume
is turned down, set “AUDIO ATT” to “ON”
(page 64)
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 64)
• Set “DIGITAL OUT” to “ON” (page 64)
D
B D
A
B-1
C-1
B-2 C-2 D