Filter
Top Products
DR-BT22iK [GB] 3-280-122-11(1)
DR-BT22iK [GB] 3-280-122-11(1)
27
Re-pairing the transmitter and the headset
1
Turn on the power of iPod.
(Make sure the iPod is in pause mode.)
2
Connect the transmitter to the iPod (page 16).
3
Place the transmitter and the headset to be paired together
within 1 m (3 ft).
4
Press and hold the POWER button of the headset for about 7
seconds or more to enter “Pairing in process” while the headset is
turned o.
Aer about 3 seconds, the headset indicator (red) and the
headset indicator (blue) will ash twice, but keep pressing the
POWER button.
Release the POWER button when the headset indicator starts
ashing quickly. e headset enters the pairing process.
5
Press and hold the power button of the transmitter for about 7
seconds or more to enter “Pairing in process.”
Aer about 1 second, the transmitter indicator will ash twice,
but keep pressing the power button.
Continued