Filter
Top Products
DR-BT22iK [GB] 3-280-122-11(1)
22
DR-BT22iK [GB] 3-280-122-11(1)
5
Press and hold the power button of the transmitter for about 7
seconds or more to enter “Pairing in process.”
Aer about 1 second, the transmitter indicator will ash twice,
but keep pressing the power button.
Notes
When rst power on the transmitter a er initialized, the transmitter will enter
“Pairing in process” automatically.
e pairing information is initialized if you press and hold the power button for
15 seconds. e transmitter indicator lights up for 5 seconds before the
initialization starts. Release the button immediately when the transmitter
indicator lights up.
When the transmitter indicator ashes quickly, stop pressing.
e transmitter enters “Pairing in process.”
e transmitter indicator status will vary as follows, and pairing
is established with the Bluetooth receiving device.
e transmitter indicator ashes quickly: Pairing in process
e transmitter indicator ashes (at about 1-second intervals)
when responding to the Bluetooth receiving device: Connectable
(Pairing successful)
e transmitter indicator ashes (at about 5-second intervals):
Connected
Notes
“Pairing in process” of the transmitter is released a er about 5 minutes. If
pairing is not established within about 5 minutes, repeat the above procedure
from step
4
. iPod backlight may turn on in this 5 minutes.
To enter “Pairing in process,” you need to turn o the power of the transmitter rst.
When not completed pairing
Repeat the procedure from step
2
.
To quit “Pairing in process”
Press and hold the power button of the transmitter for about 1 second to turn o
the transmitter.