Filter
Top Products
18
GB
Setup for the system (for Asian and Australian models)
Setup is necessary for the system, depending on the TV to be connected.
The initial setting for Asian models is NTSC; Australian models is PAL.
If the colour system of the TV is PAL*
To set the system to PAL, turn on the system by pressing "/1 while pressing the . button on the
system. You need to hold the . button until “HELLO” appears on the display. To reset to NTSC,
turn off the system and then turn on again using the remote while press and hold the . button on the
system, and turn the system off and then on again.
* If the colour system of the TV is NTSC, do the same operation above to set the system to NTSC.
For models with a voltage selector, set VOLTAGE SELECTOR to your
local power line voltage.
Depending on the model, the VOLTAGE SELECTOR may differ.
* Saudi Arabian model: 230-240, 220, 120-127
COAXIAL
AM
FM
75
FRONT R
CENTER WOOFER
FRONT L
SURR
R
SURR
L
VIDEO 1
VIDEO OUT
AUDIO OUT
VIDEO IN
AUDIO IN
L
R
VIDEO 2 MONITOR OUT
VIDEO IN
S VIDEO
(DVD ONLY)
VIDEO
AUDIO IN
L
R
COMPONENT VIDEO OUT
PB/CBY PR/CR
VIDEO
OUT
R
VIDEO
IN
AUDIO
OUT
AUDIO
IN
L
VIDEO
IN
INPUT
VIDEO
OUT
R
AUDIO
OUT
L
IN INOUT OUT
TV
VCR
Digital satellite receiver
VOLTAGE SELECTOR
120V220V
230V-
240V