Filter
Top Products
74
US
Simply by matching the ID of the unit and the
S-AIR sub unit, you can establish sound
transmission.
To set the ID of the unit
1 Press "/1 on the unit.
The system turns on.
2 Press SYSTEM MENU.
3 Press X/x repeatedly until “S-AIR ID”
appears in the front panel display, then
press or c.
4 Press X/x to select the desired ID.
You can select any ID (A, B, or C).
5 Press .
The setting is made.
6 Press SYSTEM MENU.
The system menu turns off.
7 Set the S-AIR sub unit to the same ID.
Sound transmission is established as
follows (example):
Ti
p
• To confirm the current ID, perform Steps 1 to 3
above. When you pair the unit with the S-AIR sub
unit (page 76), “(PAIRING)” appears beside ID in
the front panel display.
To set the ID of the surround
amplifier
1 Make sure that the SURROUND
SELECTOR switch of the surround
amplifier is set to SURROUND.
2 Set the S-AIR ID switch of the surround
amplifier to match the ID (A, B, or C) of
the unit.
3 Press POWER on the surround
amplifier.
When sound transmission is established,
the POWER / ON LINE indicator of the
surround amplifier turns green.
For details of the POWER / ON LINE
indicator, see “To check the transmission
status” (page 34).
To set the ID of the S-AIR
receiver
Refer to the operating instructions of the S-AIR
receiver.
To use multiple S-AIR main units
You can use multiple S-AIR main units by
setting a different ID for each component.
Establishing sound
transmission between the unit
and S-AIR sub unit
(ID setting)
For the surround amplifier
For the S-AIR receiver
ID A
S-AIR main unit
(This unit)
ID A
S-AIR sub unit
ID A
S-AIR sub unit
Other S-AIR
main unit
S-AIR main unit
(This unit)
ID A
S-AIR sub unit
ID A
S-AIR
sub unit
ID B
S-AIR sub unit
ID A
ID B