Filter
Top Products
5
GB
Getting Started
3 Connect the VIDEO OUT jack to the
video input jack on your TV with the
supplied video connecting cord.
V
I
D
E
O
O
U
T
When using a TV
Turn on your TV and set the input selector to
video input so you can view the pictures from
the system.
4 Set SYSTEM SELECT (color system)
to PAL or NTSC depending on the
color system of your TV.
AUTO
SYSTEM
SELECT
NTSC PAL
If your TV automatically
changes the color system
according to the input signal:
Set SYSTEM SELECT to AUTO.
The video signal will be output in the color
system of the VIDEO CD being played back.
If the color system of your TV
is NTSC:
Set SYSTEM SELECT to NTSC.
When this system is selected, video images
recorded in the PAL system will be stretched
vertically, and the upper and lower parts of the
picture will be cut off.
If the color system of your TV
is PAL:
Set SYSTEM SELECT to PAL (the factory
setting).
When this system is selected, video images
recorded in the NTSC system will be stretched
horizontally, and the upper and lower parts of
the screen will be masked in black.
Note
Be sure to turn off the system before you change
the SYSTEM SELECT setting.
5 Connect the power cord to a wall outlet.
continued