Filter
Top Products
16
GB
CMT-U1BT.GB.2-683-494-61(1)
Playing music of a BLUETOOTH device
You can operate a BLUETOOTH device by
connecting the system and a BLUETOOTH
device using AVRCP. If the system is not
connected with a BLUETOOTH device using
AVRCP, “Not in Use” appears when you
operate the system.
1
Select the BLUETOOTH function.
Press BLUETOOTH
on the unit.
2
Establish the connection from the
BLUETOOTH device.
For details about the operations of
the BLUETOOTH device, refer to the
operation manual supplied with your
BLUETOOTH device.
Once the connection is established, the
system display changes as follows:
“Connect”
Name of the BLUETOOTH
device
3
Start playback.
Press (or BLUETOOTH on the
unit)
.
Depending on the BLUETOOTH device,
you may need to start up the AV soware of
the BLUETOOTH device beforehand.
4
Adjust the volume.
Press VOLUME +/–
.
To check the address of a connected
BLUETOOTH device
Press DISPLAY
while the BLUETOOTH
device name appears in the system display.
e BLUETOOTH device address appears for
8 seconds.
To cancel the connection with a BLUETOOTH
device
Change the system’s function or turn o
the system. When using the system next
time, reestablish the connection with the
BLUETOOTH device.
Other operation
To Press
Pause playback
.
Stop playback
.
Select a le
/
.
Find a point in
a le
Hold down /
.
Note
ese operations may not be available for certain
BLUETOOTH devices. In addition, the actual operations
may dier according to the connected BLUETOOTH
device.
Note on connections with BLUETOOTH
devices
If you cannot connect with a paired BLUETOOTH
device, perform the pairing operation between the system
and the BLUETOOTH device again.