Filter
Top Products
18
GB
If the system still does not
operate properly after performing
the above measures, reset the
system as follows:
1 Disconnect the mains lead.
2 Reconnect the mains lead.
3 Press ?/1 to turn on the system.
4 Move lever on the unit to x and press
FUNCTION and ?/1 on the unit.
The system is reset to the factory settings. You
should set the settings you made, such as the
preset stations, clock, and timer.
One of the following messages may appear or
flash in the display during operation.
CD
No Disc
There is no disc in the player.
No Step
All of the programmed tracks have been erased.
Over
You have reached the end of the disc while pressing
M during playback or pause.
Push STOP!
You pressed PLAY MODE during playback.
Step Full!
You tried to program 25 or more tracks (steps).
TUNER
Complete!
The preset operation ended normally.
TIMER
OFF TIME NG
The Daily Timer start and end times are set to the
same time.
SET CLOCK!
You tried to set the timer, before you set the clock.
SET TIMER!
You pressed CLOCK/TIMER SELECT, before you
set the timer.
Messages