Filter
Top Products
12
GB
You can wake up to music at a preset time. Make
sure you have set the clock (see “Setting the
clock” on page 5).
1 Prepare the sound source you want to
play.
• CD: Insert a disc. To start from a specific
track, make a program (see “Creating
your own program” on page 7).
• TUNER: Tune in the preset radio station
(see “Listening to the radio” on page 9).
2 Press VOL +/– (or turn VOLUME control
on the unit) to adjust the volume.
3 Press CLOCK/TIMER SET.
4 Press . or > repeatedly until
“DAILY SET ?” appears, then press
ENTER.
5 Set the time to start playing.
Press . or > repeatedly to set the
hour, then press ENTER.
The minute indication flashes.
Press . or > repeatedly to set the
minute, then press ENTER.
6 Set the time to stop playing following
the same procedure as step 5.
7 Press . or > repeatedly until the
desired sound source appears.
Each time you press the button, the display
changes cyclically as follows:
TUNER y CD PLAY
8 Press ENTER.
The start time, the stop time, the sound
source and the volume appear in turn, then
the original display returns.
9 Press ?/1 to turn off the system.
Other operations
Notes
• If you use the Daily Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
• If the system is on about 15 seconds before the preset
time, the Daily Timer will not be activated.
• You cannot use the optional component connected to
MD (TAPE) IN jack as the sound source for Daily
Timer.
Waking up to music
— Daily Timer
To Do this
Check the setting 1 Press CLOCK/TIMER
SELECT.
2 Press . or >
repeatedly until “DAILY
ON?” appears, then press
ENTER.
Change the setting Start over from step 1.
Cancel the timer
1 Press CLOCK/TIMER
SELECT.
2 Press . or >
repeatedly until “DAILY
OFF?” appears, then press
ENTER.