Filter
Top Products
18
GB
Tip
If you select both sides recording and the tape reaches
the end of the front side part-way through a track, the
entire track is recorded again from the beginning of the
reverse side.
You can record just the portions you like from a
CD or radio program on a tape.
You can also record from connected
components (see “Hooking up optional
components” on page 25).
Use buttons on the unit for the operation.
1 Load a recordable tape.
2 Press FUNCTION repeatedly to switch
the function to TAPE.
3 Press FUNCTION repeatedly to select
the desired source to record.
• TUNER: To record from this system’s
tuner.
• CD: To record from this system’s CD
player.
• AUDIO IN: To record from the optional
component connected to the AUDIO IN
jacks.
4 Press z REC PAUSE/START.
“REC” flashes and “N” (or “n”)
appears and the tape deck stands by for
recording.
5 Press DIRECTION repeatedly to select
“g” to record on one side or “h” (or
“j”) to record on both sides.
6 Press TAPE/nN repeatedly to select
the recording side.
If you select both sides recording or front
side recording, press TAPE/nN until
“N” appears. If you record on the reverse
side, press TAPE/nN again until “n”
appears.
7 Press z REC PAUSE/START, then start
playing the desired source to record.
Recording starts.
Recording on a tape
manually
— Manual Recording