Filter
Top Products
CMT-DH30/DH3.GB.3-097-194-16(1)
85
GB
Additional Information
The disc title, album title, track title
and DVD-TEXT characters do not
appear properly.
Use a disc that conforms to the
ISO 9660 Level 1, Level 2, or Joliet
(expansion).
e character code that can be
displayed by this system are as follows:
Upper cases (A to Z)
Lower cases (a to z)
Numbers (0 to 9)
Symbols (< > * +, / [ ] _)
Other characters may not be displayed
correctly.
The surround eect is dicult to hear
when you are playing a Dolby Digital
or MPEG audio sound track.
Check the speaker connections
(page 18).
Depending on the DVD VIDEO, the
output signal may not be the entire 5.1
channel. It may be monaural or stereo,
even if the sound track is recorded in
Dolby Digital or MPEG audio format.
The sound loses stereo eect when
you play back an AUDIO CD, VIDEO
CD, MP3 audio track, DivX video le
or DVD VIDEO.
Make sure the system is connected
properly.
Unplug the microphone or press
KARAOKE MODE
repeatedly until
“KARAOKE MODE: OFF” appears on
the TV screen.
USB device
Are you using a supported USB
device?
If you connect an unsupported USB
device, the following problems may
occur. Check the information on the
websites about compatible USB devices
(page 103).
e USB device is not recognized.
File or folder names are not
displayed on this system.
Playback is not possible.
e sound skips.
ere is noise.
“Over Current” appears.
A problem has been detected with the
level of electrical current from the
(USB) port
. Turn o the system and
remove the USB device from the
(USB) port
. Make sure there is no
problem with the USB device. If this
display pattern persists, contact your
nearest Sony dealer.
There is no sound.
e USB device is not connected
correctly. Turn o the system, then
reconnect the USB device and check if
the USB MEMORY indicator
lights
up.
The sound is distorted.
e bit rate used when encoding the
les was low. Send les encoded with
higher bit rates to the USB device.
Continued